Orlando, FL
November 1-4, 2027
Dr. Nina Lanza is the Team Lead for Space and Planetary Exploration in Space and Remote Sensing (ISR- 2) at Los Alamos National Laboratory. She is on the science teams for the ChemCam instrument onboard the NASA Curiosity rover and the SuperCam instrument onboard the Perseverance rover. Her current research focuses on understanding the origin and nature of manganese minerals on Mars and how they may serve as potential biosignatures. In addition to her research on Mars, Dr.
Jyoti Mazumder is Robert H. Lurie Professor of Engineering in the Department of Mechanical Engineering and Materials Science and Director of Center for Laser Aided Intelligent Manufacturing at the University of Michigan in Ann Arbor. He is an elected member of National Academy of Engineering. He has published more than 400 papers, co-authored books on Laser Chemical Vapor Deposition and Laser Materials Processing, edited/co-edited 10 books on topics related to laser materials processing and Mechanical Engineering, holds 24 U.S patents and has 8 patents pending. Dr.
Prof. Kenichi L. Ishikawa received the B.Eng. and M.Eng degrees in nuclear engineering from The University of Tokyo (Japan) in 1992 and 1995, respectively, and the Ph.D. (Dr. rer. nat.) degree in physics from RWTH Aachen University (Germany) in 1998. He is currently a Professor at Department of Nuclear Engineering and Management, Graduate School of Engineering, as well as Research Institute for Photon Science and Laser Technology, The University of Tokyo. He is concurrently Guest Professor at Osaka University since 2019.
Dr. Abdalla R. Nassar is an Associate Research Professor and a department head within the Materials Science Division of the Applied Research Laboratory (ARL) at Penn State. Dr. Nassar also has Graduate Faculty appointments with the Engineering Science and Mechanics Department, the Additive Manufacturing & Design Graduate Program, and the Department of Mechanical Engineering at Penn State. He has worked in the field laser processing of metals for over a decade and specifically focused on laser-based AM of metals over the past eight years.
Dr. Ty Olmstead has been the Director of Technology at Ocean Insight (formerly Ocean Optics Inc.) since 2016 bringing with him over 20 years as a technology leader developing optic and photonic systems and integrating them into architectures for custom applications. As a senior member of the leadership team at Ocean Insight, Dr. Olmstead drives R&D, product development, and custom solutions using by balancing the fine edge of innovation and structured engineering and quality principles.
The NASA Curiosity rover has been exploring the surface of Mars for the past eight years, carrying with it the ChemCam instrument as part of its scientific payload. ChemCam is a suite of instruments that includes a laser-induced breakdown spectroscopy (LIBS) instrument, which provides chemistry information about geologic materials at standoff distances of up to 7 m from the rover. The ChemCam LIBS instrument has produced over 800,000 individual spectra, an unprecedented number of observations from a single instrument on Mars.
Economist Magazine hailed Additive manufacturing (AM) as “Third Industrial Revolution”. AM also features prominently in Factory 4.0. It has been practiced in one form or other for more than 5000 years. A pyramid in Egypt was built at 2800 BC using layer-by-layer construction. Modern versions for this technology are around for almost three decades. The first patent on steriolithography was issued in 1986 to Charles Hull. In many ways it is “back to the future”
For a brighter future of the global society, Japan is committed to achieving sustainable growth and becoming a pioneer in the establishment of a new social model Society 5.0. Society 5.0 is defined as a human-centered society that balances economic advancement with the resolution of social problems by a system that highly integrates cyberspace and physical space, i.e., cyber-physical system (CPS).
Laser-based powder bed fusion (PBF) and directed energy deposition (DED) additive manufacturing have been embraced by much of the aerospace and defense industry for part production and repair. Unfortunately, there still remains considerable uncertainty regarding the causes and effects of many defects types observed in PBF and DED components. Numerous conditions can lead to the formation of defects (i.e. internal discontinuities or undesirable microstructure) that can negatively affect build and part quality. Some of these defects are easily attributable to systematic errors (e.g.
Since before the first studies of Endre Mester with the Ruby laser where he showed accelerated wound healing, biophotonics has demonstrated transformational solutions in Medicine. This talk will present a review of several successes biophotonics has had in Medicine and new opportunities. Devices including Laser Scribing, OCT, Refractive Lasers, and Femtosecond Laser-Assisted Cataract Surgery have transformed the standard of care in Medicine. As we look back and to the future, what is next for biophotonics in Medicine? Transformation of aphakic IOLs? COVID-19 detection? Drug fabrication?