With new suppliers and devices entering the market, and a greater range of materials and material suppliers, Laser Additive Manufacturing is one of the highest growth areas within manufacturing globally. The Laser Additive Manufacturing track shines a spotlight on the latest techniques in additive manufacturing—covering technology, digital twins, materials, processes and applications. Don’t miss out!
Session Search
* Program subject to change.
| Day | Session | Title | Keywords |
|---|---|---|---|
| Monday | DEDAM Process and Materials I | Adaptive Powder Nozzle Setting for Enhanced Efficiency in Laser Metal Deposition |
|
| Monday | DEDAM Process and Materials I | Process Development and Process Parameter Guidelines for Thin Wall Deposition with IN718 Using Extreme High Speed Laser Material Deposition (EHLA 3D) |
|
| Monday | DEDAM Process and Materials I | The Melt Pool Dynamics on Different Substrate Materials in High-speed Laser Directed Energy Deposition Process |
|
| Monday | DEDAM Process and Materials I | Light Valve Technology for Rapid, High Resolution 3D Area Printing |
|
| Monday | DEDAM Process and Materials II | Tailoring Material Properties of Duplex Stainless Steel by Ded-Lb/M and In-Situ Alloying With Elemental Powders |
|
| Monday | DEDAM Process and Materials II | In-Situ Process Monitoring of Directed Energy Deposition Powder Flow to Detect Anomalies |
|
| Monday | DEDAM Process and Materials II | Grain Size Manipulation by Wire Laser Direct Energy Deposition of 316L with Ultrasonic Assistance |
|
| Monday | DEDAM Process and Materials II | Influence of Post-processing Heat-Treatment on the Mechanical Performance of Aisi 410L Stainless Steel Manufactured by L-Ded Process |
|
| Monday | DEDAM Process and Materials III | Comparison and Analysis of Hyperspectral Temperature Data in Directed Energy Deposition |
|
| Monday | DEDAM Process and Materials III | Characterization of Optical Emissions During Laser Metal Deposition for the Implementation of an In-Process Powder Stream Monitoring |
|
| Monday | DEDAM Process and Materials III | In-Situ Monitoring and Intermittent Controller for Adaptive Trajectory Generation During Laser-Directed Energy Deposition via Powder Feeding |
|
| Monday | DEDAM Process and Materials III | Monitoring the Degree of Dilution During Directed Energy Deposition of Aluminium Bronze and H13 Tool Steel Using Optical Emission Spectroscopy |
|
| Tuesday | DEDAM Process and Materials IV | Welding Between Confinements as a New Approach for High Deposition Rate Additive Manufacturing With Laser-Assisted Double Wire Welding With Non-transferred Arc |
|
| Tuesday | DEDAM Process and Materials IV | Latest Developments in Coaxial Multi-Wire High-Power Laser Cladding |
|
| Tuesday | DEDAM Process and Materials IV | A Comparison of Wire-Laser and Wire-Arc Directed Energy Deposition Processes |
|
| Tuesday | DEDAM Process and Materials IV | Manufacturing of Large-Scaled Components by Digital-Assisted Directed Energy Deposition |
|
| Tuesday | DEDAM Process and Materials V | Laser Cladding (DED); A High-Speed-Imaging Examination of Powder Catchment Efficiency as a Function of Melt Pool Geometry |
|
| Tuesday | DEDAM Process and Materials V | Development of a Laser Preheating Concept for Directed Energy Deposition |
|
| Tuesday | DEDAM Process and Materials V | Effects of Holding Temperature during Induction Heating-Assisted Laser-Directed Energy Deposition of Inconel 718 |
|
| Tuesday | PBFAM Process and Materials I | Development and Assessment of a Methdology for Abstraction of Topology Optimization Results to Enable the Substitution of Optimized Beams |
|
| Tuesday | PBFAM Process and Materials I | Process Qualification, Additive Manufacturing, and Post Processing of a Hydrogen Peroxide / Kerosene Aerospike Breadboard Engine |
|
| Tuesday | PBFAM Process and Materials I | Powder Degradation as a Consequence of Laser Interaction: A Study of SS 316L Powder Reuse on the Laser Directed Energy Deposition (L-DED) Process |
|
| Tuesday | Poster Gallery | Fatigue Strength and Impact Toughness Dependence of PBF-LB Manufactured 316L Stainless Steel on Orientation and Layer Thickness |
|
| Tuesday | Poster Gallery | Exploring the Influence of Hot-Wire Power Density on Wire Melting Behavior in Laser Directed Energy Deposition (L-Ded) |
|
| Tuesday | Poster Gallery | Experimental Evaluation of WC-Co Alloy Layer Formation Process by Multi Beam Type Laser Metal Deposition With Blue Diode Lasers |
|
| Tuesday | Poster Gallery | A Novel Scanning Strategy Considering Forming Quality and Build Efficiency in Laser Powder Bed Fusion |
|
| Tuesday | Poster Gallery | Effects of WC Ratios on Bead Size and Crack Initiation in Forming WC-Co Cemented Carbide by Laser Metal Deposition |
|
| Tuesday | Poster Gallery | Comparison with Blue and IR Laser for Inconel Fabrication in Selective Laser Melting |
|
| Wednesday | Closing Plenary | Profitable and Certified Metal 3D Printing |
|
| Wednesday | PBFAM Process and Materials II | Novel Multi-Material Lattice Structures Fabricated via Laser-Powder Bed Fusion Process |
|
| Wednesday | PBFAM Process and Materials II | Influence of Temperature and Beam Size on Weld Track Shape in Laser Powder Bed Fusion of Pure Copper Using Near-Infrared Laser System |
|
| Wednesday | PBFAM Process and Materials II | On the Limitations of Small Cubes as Test Coupons for Process Parameter Optimization in Laser Powder Bed Fusion of Metals |
|
| Wednesday | PBFAM Process and Materials III | Physics-Based High-Fidelity Modeling of Metal Additive Manufacturing Considering the Vapor Plume Dynamics and Laser Attenuation |
|
| Wednesday | PBFAM Process and Materials III | Design and Assessment of an Additively Manufactured Schwarz Diamond Triply Periodic Minimal Surface Fluid-Fluid Heat Exchanger |
|
| Wednesday | PBFAM Process and Materials IV | Process Development for Laser Powder Bed Fusion of Grcop-42 Using a 515 NM Laser Source |
|
| Wednesday | PBFAM Process and Materials IV | Process Speed Increase in Laser Powder Bed Fusion Thanks to Beam Shaping with Multi-Plane Light Conversion |
|